kWh to Ah equation
This page isolates the kWh to Ah relationship so the phase, power-factor, efficiency, or time basis is visible.
Ah = 1000 × E(kWh) / Vwhere:
- Ah
- Battery charge capacity[Ah]
- E
- Energy
- V
- Voltage[V]
Use consistent units and check whether the input power is electrical input or shaft output.
How to convert kWh to Ah
Convert kWh to Ah with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.
- Identify the quantities you already know.
- Select the applicable phase, power factor, efficiency, or time basis.
- Enter nominal values and compare the result with the equipment nameplate.
Worked example
kWh to Ah: 2.4 kWh, 24 V gives 100.0 Ah.
kWh → Ah = 100.0 Ah
Method & Sources
Method
Formula used
Ah = 1000 × E(kWh) / V
Input basis
This page isolates the kWh to Ah relationship so the phase, power-factor, efficiency, or time basis is visible.
- Battery energy [kWh]
- Voltage [V]
- Ah — Battery charge capacity [Ah]
- E — Energy
- V — Voltage [V]
Units
kWh · V · Ah
Display and rounding
No separate display or rounding rule is stated on this page.
Scope and limits
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This conversion assumes a steady voltage and does not model battery efficiency, state of health, or discharge limits.
- This is a conversion aid, not a complete equipment selection or protection study.
- Use consistent units and check whether the input power is electrical input or shaft output.
Sources
- NIST Special Publication 811SI units and defined conversion relationships used by the focused conversion pages.
- VIOX low-voltage electrical formulas guidePublished formula reference linked from this page.
Common kWh to Ah values
The table changes only the first input while retaining the page's documented example assumptions.
| Input kWh | Result Ah |
|---|---|
| 0.5 kWh | 20.8 Ah |
| 5 kWh | 208.3 Ah |
| 12.0 kWh | 500.0 Ah |
Assumptions and limits
This conversion assumes a steady voltage and does not model battery efficiency, state of health, or discharge limits.
Formulas and sources
The equations use the SI relationships for electrical power, energy, charge, and the defined mechanical horsepower value. Verify local code, equipment data, and project assumptions before engineering use.
NIST SI unit rules and style guideVIOX electrical formulas reference
Assumptions
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This conversion assumes a steady voltage and does not model battery efficiency, state of health, or discharge limits.
Important Warnings
- This is a conversion aid, not a complete equipment selection or protection study.