amps to volts equation
This page isolates the amps to volts relationship so the phase, power-factor, efficiency, or time basis is visible.
V = VA / Iwhere:
- V
- Voltage[V]
- VA
- Apparent power[VA]
- I
- Current[A]
Use consistent units and check whether the input power is electrical input or shaft output.
How to convert amps to volts
Convert amps to volts with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.
- Identify the quantities you already know.
- Select the applicable phase, power factor, efficiency, or time basis.
- Enter nominal values and compare the result with the equipment nameplate.
Worked example
amps to volts: 8 A, 960 VA gives 120.0 V.
amps → volts = 120.0 V
Method & Sources
Method
Formula used
V = VA / I
Input basis
This page isolates the amps to volts relationship so the phase, power-factor, efficiency, or time basis is visible.
- Current [A]
- Apparent power [VA]
- V — Voltage [V]
- VA — Apparent power [VA]
- I — Current [A]
Units
A · VA · V
Display and rounding
No separate display or rounding rule is stated on this page.
Scope and limits
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This is a unit conversion, not an equipment-selection approval.
- This is a conversion aid, not a complete equipment selection or protection study.
- Use consistent units and check whether the input power is electrical input or shaft output.
Sources
- NIST Special Publication 811SI units and defined conversion relationships used by the focused conversion pages.
- VIOX low-voltage electrical formulas guidePublished formula reference linked from this page.
Common amps to volts values
The table changes only the first input while retaining the page's documented example assumptions.
| Input amps | Result volts |
|---|---|
| 2.5 amps | 384.0 V |
| 5 amps | 192.0 V |
| 12.5 amps | 76.8 V |
Assumptions and limits
This is a unit conversion, not an equipment-selection approval.
Formulas and sources
The equations use the SI relationships for electrical power, energy, charge, and the defined mechanical horsepower value. Verify local code, equipment data, and project assumptions before engineering use.
NIST SI unit rules and style guideVIOX electrical formulas reference
Assumptions
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This is a unit conversion, not an equipment-selection approval.
Important Warnings
- This is a conversion aid, not a complete equipment selection or protection study.