Select language

Choose the language for the tools.

Electrical Fundamentals & Circuit Analysis

Resistor Wattage Calculator

Calculate resistor dissipation from V and R, I and R, or V and I, apply a two-times engineering margin, and select the next common power rating.

Resistor power equations

The same dissipation can be calculated from different pairs of circuit quantities.

P = V² / R
P = I² × R
P = V × I
Prating ≥ 2 × P

where:

P
Steady-state resistor dissipation[W]
V
Voltage across the resistor[V]
I
Current through the resistor[A]
R
Resistance[Ω]

The doubled value is a starting design margin, not a mandatory code multiplier.

How to calculate resistor power

Choose the two known quantities. Voltage and resistance use V²/R, current and resistance use I²R, and voltage and current use P = VI.

Worked voltage example

For 12 V across 100 Ω, the resistor dissipates 1.44 W. A two-times design minimum is 2.88 W, so the next common value in the calculator's list is 3 W.

P = 12² / 100 = 1.44 W

2P = 2.88 W → 3 W

Method & Sources

Method

Formula used

  • P = V² / R
  • P = I² × R
  • P = V × I
  • Prating ≥ 2 × P

Input basis

The same dissipation can be calculated from different pairs of circuit quantities.

  • Known values
  • Voltage [V]
  • Resistance [Ω]
  • Current [mA]
  • Current [A]
  • P — Steady-state resistor dissipation [W]
  • V — Voltage across the resistor [V]
  • I — Current through the resistor [A]
  • R — Resistance [Ω]

Units

V · Ω · mA · A · W

Display and rounding

No separate display or rounding rule is stated on this page.

Scope and limits

  • The resistor operates in steady state and the entered values describe the same instant.
  • The two-times margin is a conservative engineering recommendation.
  • The suggested rating is selected from a disclosed 1/16 W to 10 W common list.
  • This steady-state result does not cover pulse energy, surge power, short-circuit events, or non-linear loads.
  • The physical resistor still needs voltage, temperature, tolerance, stability, and manufacturer derating checks.
  • The doubled value is a starting design margin, not a mandatory code multiplier.

Sources

  • Estimation basis: published page formula, assumptions, and warningsEstimation basisNo separate public standard is cited; the published equation and stated input scope form a planning or screening basis.

Worked current example

For 10 mA through 1 kΩ, convert current to 0.010 A, then calculate P = 0.010² × 1000 = 0.10 W before applying margin or temperature derating.

Selecting a common power rating

The calculator uses a disclosed list: 1/16, 1/8, 1/4, 1/2, 1, 2, 3, 5, and 10 W. Availability varies by resistor family and manufacturer.

Thermal and pulse limits

A power rating is not valid at every ambient temperature or mounting condition. Check voltage rating, hot-spot temperature, derating curve, pulse energy, and overload capability in the exact datasheet.

Assumptions

  • The resistor operates in steady state and the entered values describe the same instant.
  • The two-times margin is a conservative engineering recommendation.
  • The suggested rating is selected from a disclosed 1/16 W to 10 W common list.

Important Warnings

  • This steady-state result does not cover pulse energy, surge power, short-circuit events, or non-linear loads.
  • The physical resistor still needs voltage, temperature, tolerance, stability, and manufacturer derating checks.

FAQ

What power does 12 V across 100 Ω produce?

P = 12² / 100 = 1.44 W. Twice the calculated value is 2.88 W, so the next common rating in this tool is 3 W.

What is the dissipation for 10 mA through 1 kΩ?

P = 0.010² × 1000 = 0.10 W before any application margin.

Is the two-times factor mandatory?

No. It is a starting margin. Some low-power or pulse applications use larger margins, while the manufacturer may specify another derating rule.

Why does the physical size matter?

Power rating, construction, ambient temperature, mounting, and allowable surface temperature determine how much heat the resistor can release safely.

Can I use this for an LED series resistor?

Use the LED resistor calculator for the resistance value and LED current, then verify the resulting power rating here or in that calculator.