Select language

Choose the language for the tools.

Electrical Fundamentals & Circuit Analysis

SMD Resistor Code Calculator

Decode three-digit and four-digit SMD resistor codes, R decimal markings, and EIA-96 codes into a nominal resistance value.

EIA-96

SMD resistor-code method

The marking system depends on code length and letter conventions.

Three-digit code
R = d1d2 × 10^d3
Four-digit code
R = d1d2d3 × 10^d4
R decimal code
R = numeric value with R as the decimal point

where:

d
Numeric marking digit
R
Decimal-point marker

How SMD resistor codes work

The calculator distinguishes three-digit, four-digit, R decimal, and EIA-96 markings before applying the correct relationship.

Worked SMD examples

103 decodes as 10 × 10³ = 10 kΩ, and 4R7 decodes as 4.7 Ω because R marks the decimal point.

Method & Sources

Method

Formula used

  • R = d1d2 × 10^d3
  • R = d1d2d3 × 10^d4
  • R = numeric value with R as the decimal point

Input basis

The marking system depends on code length and letter conventions.

  • SMD resistor code
  • d — Numeric marking digit
  • R — Decimal-point marker

Units

This page does not label its inputs with physical units.

Display and rounding

No separate display or rounding rule is stated on this page.

Scope and limits

  • Nominal value only; EIA-96 is treated as ±1%
  • Confirm package and manufacturer marking conventions; small markings and nonstandard variants can be ambiguous.

Sources

  • EIA-96, precision SMD resistor marking codeEdition not stated on this page; clause and table identifiers are preserved verbatim.
  • IEC 60062 resistor marking codesMarking convention used for color bands and SMD codes.

EIA-96 code structure

EIA-96 uses a two-digit value index and a multiplier letter. It is common on precision surface-mount resistors.

Verify the physical component

Small packages can make digits look alike. Measure out-of-circuit where practical and consult the manufacturer if the marking is unusual.

SMD marking references

Three-digit and four-digit markings use the significant digits followed by a decimal multiplier. EIA-96 combines a 01–96 value index with a multiplier letter and is commonly used for 1% resistors. Verify nonstandard manufacturer variants separately.

Assumptions

  • Nominal value only; EIA-96 is treated as ±1%

Important Warnings

  • Confirm package and manufacturer marking conventions; small markings and nonstandard variants can be ambiguous.

FAQ

What is SMD code 103?

10 × 10³ = 10,000 Ω, or 10 kΩ.

What does 4R7 mean?

R represents a decimal point, so 4R7 is 4.7 Ω.

How do I read a four-digit code?

Use the first three digits as the significant value and the fourth as the decimal power, for example 4702 = 470 × 10² = 47 kΩ.

What is an EIA-96 code?

EIA-96 uses a two-digit value code from 01 to 96 followed by a multiplier letter, normally for 1% resistors.

Should I measure the resistor as well?

Yes. Measure out-of-circuit when possible; markings give nominal value and may not reveal drift or damage.