kVA to kW equation
This page isolates the kVA to kW relationship so the phase, power-factor, efficiency, or time basis is visible.
kW = kVA × PFwhere:
- kW
- Active power[kW]
- kVA
- Apparent power[kVA]
- PF
- Power factor
Use consistent units and check whether the input power is electrical input or shaft output.
How to convert kVA to kW
Convert kVA to kW with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.
- Identify the quantities you already know.
- Select the applicable phase, power factor, efficiency, or time basis.
- Enter nominal values and compare the result with the equipment nameplate.
Worked example
kVA to kW: 50 kVA, 0.8 gives 40.0 kW.
kVA → kW = 40.0 kW
Method & Sources
Method
Formula used
kW = kVA × PF
Input basis
This page isolates the kVA to kW relationship so the phase, power-factor, efficiency, or time basis is visible.
- Apparent power [kVA]
- Power factor
- kW — Active power [kW]
- kVA — Apparent power [kVA]
- PF — Power factor
Units
kVA · kW
Display and rounding
No separate display or rounding rule is stated on this page.
Scope and limits
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This is a unit conversion, not an equipment-selection approval.
- This is a conversion aid, not a complete equipment selection or protection study.
- Use consistent units and check whether the input power is electrical input or shaft output.
Sources
- NIST Special Publication 811SI units and defined conversion relationships used by the focused conversion pages.
- VIOX low-voltage electrical formulas guidePublished formula reference linked from this page.
Common kVA to kW values
The table changes only the first input while retaining the page's documented example assumptions.
| Input kVA | Result kW |
|---|---|
| 10.0 kVA | 8 kW |
| 25.0 kVA | 20.0 kW |
| 100.0 kVA | 80.0 kW |
Assumptions and limits
This is a unit conversion, not an equipment-selection approval.
Formulas and sources
The equations use the SI relationships for electrical power, energy, charge, and the defined mechanical horsepower value. Verify local code, equipment data, and project assumptions before engineering use.
NIST SI unit rules and style guideVIOX electrical formulas reference
Assumptions
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This is a unit conversion, not an equipment-selection approval.
Important Warnings
- This is a conversion aid, not a complete equipment selection or protection study.