VA to kW equation
This page isolates the VA to kW relationship so the phase, power-factor, efficiency, or time basis is visible.
kW = VA × PF / 1000where:
- kW
- Active power[kW]
- VA
- Apparent power[VA]
- PF
- Power factor
Use consistent units and check whether the input power is electrical input or shaft output.
How to convert VA to kW
Convert VA to kW with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.
- Identify the quantities you already know.
- Select the applicable phase, power factor, efficiency, or time basis.
- Enter nominal values and compare the result with the equipment nameplate.
Worked example
VA to kW: 6000 VA, 0.88 gives 5.28 kW.
VA → kW = 5.28 kW
Method & Sources
Method
Formula used
kW = VA × PF / 1000
Input basis
This page isolates the VA to kW relationship so the phase, power-factor, efficiency, or time basis is visible.
- Apparent power [VA]
- Power factor
- kW — Active power [kW]
- VA — Apparent power [VA]
- PF — Power factor
Units
VA · kW
Display and rounding
No separate display or rounding rule is stated on this page.
Scope and limits
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This is a unit conversion, not an equipment-selection approval.
- This is a conversion aid, not a complete equipment selection or protection study.
- Use consistent units and check whether the input power is electrical input or shaft output.
Sources
- NIST Special Publication 811SI units and defined conversion relationships used by the focused conversion pages.
- VIOX low-voltage electrical formulas guidePublished formula reference linked from this page.
Common VA to kW values
The table changes only the first input while retaining the page's documented example assumptions.
| Input VA | Result kW |
|---|---|
| 500.0 VA | 0.44 kW |
| 2200 VA | 1.936 kW |
| 10000 VA | 8.8 kW |
Assumptions and limits
This is a unit conversion, not an equipment-selection approval.
Formulas and sources
The equations use the SI relationships for electrical power, energy, charge, and the defined mechanical horsepower value. Verify local code, equipment data, and project assumptions before engineering use.
NIST SI unit rules and style guideVIOX electrical formulas reference
Assumptions
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- This is a unit conversion, not an equipment-selection approval.
Important Warnings
- This is a conversion aid, not a complete equipment selection or protection study.