kW to kWh equation
This page isolates the kW to kWh relationship so the phase, power-factor, efficiency, or time basis is visible.
E(kWh) = P(kW) × t(h)where:
- E
- Energy
- P
- Power
- t
- Time[h]
Use consistent units and check whether the input power is electrical input or shaft output.
How to convert kW to kWh
Convert kW to kWh with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.
- Identify the quantities you already know.
- Select the applicable phase, power factor, efficiency, or time basis.
- Enter nominal values and compare the result with the equipment nameplate.
Worked example
kW to kWh: 6 kW, 8 h gives 48.0 kWh.
kW → kWh = 48.0 kWh
Method & Sources
Method
Formula used
E(kWh) = P(kW) × t(h)
Input basis
This page isolates the kW to kWh relationship so the phase, power-factor, efficiency, or time basis is visible.
- Power [kW]
- Time [h]
- E — Energy
- P — Power
- t — Time [h]
Units
kW · h
Display and rounding
No separate display or rounding rule is stated on this page.
Scope and limits
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- Power is an instantaneous rate; energy is power accumulated over time, so the time input is required.
- This is a conversion aid, not a complete equipment selection or protection study.
- Use consistent units and check whether the input power is electrical input or shaft output.
Sources
- NIST Special Publication 811SI units and defined conversion relationships used by the focused conversion pages.
- VIOX low-voltage electrical formulas guidePublished formula reference linked from this page.
Common kW to kWh values
The table changes only the first input while retaining the page's documented example assumptions.
| Input kW | Result kWh |
|---|---|
| 1 kW | 8 kWh |
| 2.5 kW | 20.0 kWh |
| 12.0 kW | 96.0 kWh |
Power and energy distinction
Power is an instantaneous rate; energy is power accumulated over time, so the time input is required.
Formulas and sources
The equations use the SI relationships for electrical power, energy, charge, and the defined mechanical horsepower value. Verify local code, equipment data, and project assumptions before engineering use.
NIST SI unit rules and style guideVIOX electrical formulas reference
Assumptions
- Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
- Power is an instantaneous rate; energy is power accumulated over time, so the time input is required.
Important Warnings
- This is a conversion aid, not a complete equipment selection or protection study.