Select language

Choose the language for the tools.

Electrical Fundamentals & Circuit Analysis

Watts to Volts Calculator

Convert watts to volts with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.

watts to volts equation

This page isolates the watts to volts relationship so the phase, power-factor, efficiency, or time basis is visible.

Conversion relation
V = W / (kφ × I × PF)

where:

V
Voltage[V]
W
Active power[W]
I
Current[A]
PF
Power factor
kφ
Phase factor: 1 for DC or single-phase and √3 for balanced three-phase line-to-line voltage

Use consistent units and check whether the input power is electrical input or shaft output.

How to convert watts to volts

Convert watts to volts with the correct phase, power-factor, efficiency, time, or voltage basis where the selected conversion requires it.

  1. Identify the quantities you already know.
  2. Select the applicable phase, power factor, efficiency, or time basis.
  3. Enter nominal values and compare the result with the equipment nameplate.

Worked example

watts to volts: 950 W, 5 A, single-phase AC, 0.95 gives 200.0 V.

watts → volts = 200.0 V

Method & Sources

Method

Formula used

  • V = W / (kφ × I × PF)

Input basis

This page isolates the watts to volts relationship so the phase, power-factor, efficiency, or time basis is visible.

  • Real power [W]
  • Current [A]
  • System
  • Power factor
  • V — Voltage [V]
  • W — Active power [W]
  • I — Current [A]
  • PF — Power factor
  • kφ — Phase factor: 1 for DC or single-phase and √3 for balanced three-phase line-to-line voltage

Units

W · A · V

Display and rounding

No separate display or rounding rule is stated on this page.

Scope and limits

  • Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
  • Balanced phases and nominal voltage are assumed; verify the actual connection and nameplate values for final engineering use.
  • This is a conversion aid, not a complete equipment selection or protection study.
  • Use consistent units and check whether the input power is electrical input or shaft output.

Sources

Common watts to volts values

The table changes only the first input while retaining the page's documented example assumptions.

Input wattsResult volts
100.0 watts21.1 V
600.0 watts126.3 V
2400 watts505.3 V

Assumptions and limits

Balanced phases and nominal voltage are assumed; verify the actual connection and nameplate values for final engineering use.

Formulas and sources

The equations use the SI relationships for electrical power, energy, charge, and the defined mechanical horsepower value. Verify local code, equipment data, and project assumptions before engineering use.

Assumptions

  • Nominal values are used for the entered voltage, phase, power factor, efficiency, or time.
  • Balanced phases and nominal voltage are assumed; verify the actual connection and nameplate values for final engineering use.

Important Warnings

  • This is a conversion aid, not a complete equipment selection or protection study.

FAQ

What formula converts watts to volts?

V = W / (kφ × I × PF)

Does watts to volts require a power factor?

Yes for AC power calculations. Use the load power factor; enter 1 only for DC or a purely resistive load.

How does phase affect watts to volts?

Three-phase AC uses a √3 factor for line-to-line voltage; single-phase and DC use 1.

Can this watts to volts calculator replace equipment data?

No. Treat the output as a conversion or screening value and verify the actual nameplate, connection, and applicable standard.

Why can volts differ from another calculator?

Different phase conventions, assumed power factor, efficiency, rounding, or whether power is input or output can change the result.